Updates for Electric CUPRA Vehicles

This update will allow you to remotely update the vehicle, to fix small system bugs, as well as to improve the vehicle operation. The improvements are the following:

Pulse inverter update to improve efficiency and power consumption. The first time you start driving after the update, it may happen that an automatic calibration will be carried out that will limit the power to 30-40 km/h or 19-25 mph. When you accelerate to this speed, you will feel a brief jerk. After releasing and accelerating again, full driving power will be available.

Installation of this update is needed to enable the installation of future Over-the-Air Updates.

This update does not increase the software version.

Update available only for ME 3.0 vehicles. (Produced  between 20/12/21 and 10/07/22). 

Rollout since: March 2023**

This update introduces a new feature aimed at detecting rare instances of battery cell discharge. It's worth emphasising that this is a rare occurrence and the update serves as a precautionary measure.

If this issue arises during the vehicle's lifespan, a yellow warning icon will appear on the digital cockpit, indicating an error in the electrical driving system. The vehicle will continue to function but it's advisable to visit a workshop promptly to address this concern and prevent any unnecessary battery wear.

Additionally, this update addresses minor bugs, enhancing the stability of remote updates.

It's important to note that this installation is a prerequisite for receiving forthcoming Over-the-Air Updates.

During installation, if your car is equipped with an anti-theft alarm, it will undergo a temporary deactivation. Following installation, it will return to its regular operation.

This update does not increase the software version.

This update is exclusively available for ME 3.0 vehicles.

Update available only for cars 3.0 (Produced  between 20/12/21 and 10/07/22). 

Rollout since: October 2023**

This update corrects minor errors, which enables remote updates.

Installation of this update is needed to enable the installation of future Over-the-Air Updates.

This update does not increase the software version.

Update available only for ME 3.4 vehicles. (Produced between 28/11/22 and 09/04/23).

Rollout since:  January 2024**

This update allows you to preset the correct power inverter settings for future software updates. This will help future efficiency improvements.

The first time you start driving after the update, it may happen that an automatic calibration will be carried out that will limit the power to 30-40 hm/h or 19-25 mph.

When you accelerate to this speed, you will feel a brief jerk. After releasing and accelerating again, full driving power will be available.

Installation of this update is needed to enable the installation of future Over-the-Air Updates.

This update does not increase the software version.

Update available only for ME 3.4 vehicles. (Produced between 28/11/22 and 09/04/23).

Rollout since: March 2024**

With this over-the-air-update, your CUPRA BORN will receive the following improvements:

• Depending on the equipment, improved availability of lane and side assist
• Improvement of tailgate opening with the key
• Minimization of charging noise caused by interferences
• Improvements in Powertrain control system
• Stabilization of the infotainment system
• Use the bidirectional charging of your 77Kw cupra Bron (1)
• Other optimizations and bug fixes

Disclaimer

(1) To use the BiDirectional (BiDi) charging function, you need a CUPRA BORN with 77kWh net energy battery, a suitable home power grid and the appropriate BiDi-charger. The availability of the BiDi-charger may vary depending on the country. For more information, please contact your CUPRA dealer.

Hints

Please note that the installation of this update is necessary to enable the installation of future updates.

Please, consider that if your car is equipped with anti-theft alarm, it will be deactivated during the installation process. Once the installation is completed, it will work again normally.

Some personal settings, such as favorite radio stations, will be reset with the installation. In compliance with the data protection regulations, note that SEAT,S.A. will process your vehicle’s VIN (Vehicle Identification Number) to identify your vehicle and solely for your software installation. You can exercise your rights or obtain additional information by consulting the Privacy Policy in your vehicle’s settings.

Rollout since: October 2024**

This over-the-air update allows you to present the correct power inverter settings for future software updates. This will help future efficiency improvements.

The first time you start driving after the update, it may happen that an automatic calibration will be carried out that will limit the power to 30-40 km/h or 19-25 mph. When you accelerate to this speed, you will feel a brief jerk. After releasing and accelerating again, full driving power will be available.

Hints

Installation of this update is needed to enable the installation of future over-the-air updates.

This update does not increase the software version number.

Please, take into account that if your car is equipped with anti-theft alarm, it will be deactivated during the installation process. Once the installation is completed, it will work again normally. In compliance with the data protection regulations, note that SEAT, S.A. will process your vehicle's VIN (Vehicle Identification Number) to identify your vehicle and solely for your software installation. You can exercise your rights or obtain additional information by consulting the Privacy Policy in your vehicle's settings.

Rollout since: October 2024**